Datasheet

Section 10 8-Bit Timers
Rev.7.00 Feb. 14, 2007 page 400 of 1108
REJ09B0089-0700
10.2.6 Module Stop Control Register (MSTPCR)
MSTPCRH MSTPCRL
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
When the MSTP12 bit in MSTPCR is set to 1, the 8-bit timer operation stops at the end of the bus
cycle and a transition is made to module stop mode. Registers cannot be read or written to in
module stop mode. For details, see section 19.5, Module Stop Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Bit 12—Module Stop (MSTP12): Specifies the 8-bit timer module stop mode.
Bit 12
MSTP12 Description
0 8-bit timer module stop mode cleared
1 8-bit timer module stop mode set (Initial value)