Datasheet

Section 17 ROM
Rev.7.00 Feb. 14, 2007 page 711 of 1108
REJ09B0089-0700
(b) Flash multipurpose data destination parameter (FMPDR: general register ER0 of CPU):
This parameter indicates the start address in the area which stores the data to be programmed in
the user MAT. When the storage destination of the program data is in flash memory, an error
occurs. The error occurrence is indicated by the WD bit (bit 2) in FPFR.
FMPDR
Bit : 31 30 29 28 27 26 25 24
MOD31 MOD30 MOD29 MOD28 MOD27 MOD26 MOD25 MOD24
Initial value : — — — — — — — —
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
Bit : 23 22 21 20 19 18 17 16
MOD23 MOD22 MOD21 MOD20 MOD19 MOD18 MOD17 MOD16
Initial value : — — — — — — — —
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
Bit : 15 14 13 12 11 10 9 8
MOD15 MOD14 MOD13 MOD12 MOD11 MOD10 MOD9 MOD8
Initial value : — — — — — — — —
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
Bit : 7 6 5 4 3 2 1 0
MOD7 MOD6 MOD5 MOD4 MOD3 MOD2 MOD1 MOD0
Initial value : — — — — — — — —
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
Bits 31 to 0—MOD31 to MOD0: Store the start address of the area which stores the program
data for the user MAT. The consecutive 128-byte data is programmed to the user MAT starting
from the specified start address.