Datasheet

Section 8 I/O Ports
Rev.7.00 Feb. 14, 2007 page 287 of 1108
REJ09B0089-0700
Port Function Control Register 2 (PFCR2)
Bit : 7 6 5 4 3 2 1 0
—
— CS167E CS25E ASOD — — —
Initial value : 0 0 1 1 0 0 0 0
R/W : R/W R/W R/W R/W R/W R R R
PFCR2 is an 8-bit readable/writable register that performs I/O port control. PFCR2 is initialized to
H'30 by a reset, and in hardware standby mode.
Bits 7 and 6—Reserved: Only 0 should be written to these bits.
Bit 5—CS167 Enable (CS167E): Enables or disables CS1, CS6, and CS7 output. For details, see
section 8.12, Port G.
Bit 4—CS25 Enable (CS25E): Enables or disables CS2, CS3, CS4, and CS5 output. Change the
CS25E setting only when the DDR bits are cleared to 0. This bit is valid in modes 4 to 6.
Bit 4
CS25E Description
0 CS2, CS3, CS4, and CS5 output disabled (can be used as I/O ports)
1 CS2, CS3, CS4, and CS5 output enabled (Initial value)
Bit 3—AS Output Disable (ASOD): Enables or disables AS output. This bit is valid in modes 4
to 6.
Bit 3
ASOD Description
0 PF6 is used as AS output pin (Initial value)
1 PF6 is designated as I/O port, and does not function as AS output pin
Bits 2 to 0—Reserved: When read, these bits are always read as 0.