Datasheet

Section 5 Interrupt Controller
Rev.6.00 Mar. 18, 2009 Page 92 of 980
REJ09B0050-0600
5.3.1 Interrupt Control Register (INTCR)
INTCR selects the interrupt control mode, and the detected edge for NMI.
Bit Bit Name Initial Value R/W Description
7, 6 − All 0 − Reserved
These bits are always read as 0 and cannot be
modified.
5
4
INTM1
INTM0
0
0
R/W
R/W
Interrupt Control Select Mode 1 and 0
These bits select either of two interrupt control
modes for the interrupt controller.
00: Interrupt control mode 0
Interrupts are controlled by I bit.
01: Setting prohibited.
10: Interrupt control mode 2
Interrupts are controlled by bits I2 to I0, and
IPR.
11: Setting prohibited.
3 NMIEG 0 R/W NMI Edge Select
Selects the input edge for the NMI pin.
0: Interrupt request generated at falling edge of
NMI input
1: Interrupt request generated at rising edge of
NMI input
2 to
0
− 0 − Reserved
These bits are always read as 0 and cannot be
modified.