Datasheet

Section 21 Flash Memory (0.18-μm F-ZTAT Version)
Rev.7.00 Mar. 18, 2009 page 951 of 1136
REJ09B0109-0700
• ERROR (one byte): Error status
ERROR = 0 indicates normal operation.
ERROR = 1 indicates error has occurred.
Table 21.14 Error Code
Code Description
H'00 No Error
H'11 Sum Check Error
H'12 Program Size Error
H'21 Device Code Mismatch Error
H'22 Clock Mode Mismatch Error
H'24 Bit Rate Selection Error
H'25 Input Frequency Error
H'26 Multiplication Ratio Error
H'27 Operating Frequency Error
H'29 Block Number Error
H'2A Address Error
H'2B Data Length Error
H'51 Erasure Error
H'52 Erasure Incomplete Error
H'53 Programming Error
H'54 Selection Processing Error
H'80 Command Error
H'FF Bit-Rate-Adjustment Confirmation Error
• SUM (one byte): Sum check
This command is accepted during programming/erasing operation, however, response time will
be longer.