Datasheet

Section 2 CPU
Rev.7.00 Mar. 18, 2009 page 51 of 1136
REJ09B0109-0700
2.6 Instruction Set
The H8S/2000 CPU has 65 types of instructions. The instructions are classified by function as
shown in table 2.1.
Table 2.1 Instruction Classification
Function Instructions Size Types
MOV B/W/L 5
POP
*
1
, PUSH
*
1
W/L
LDM, STM L
Data transfer
MOVFPE
*
3
, MOVTPE
*
3
B
ADD, SUB, CMP, NEG B/W/L 19
ADDX, SUBX, DAA, DAS B
INC, DEC B/W/L
ADDS, SUBS L
MULXU, DIVXU, MULXS, DIVXS B/W
EXTU, EXTS W/L
Arithmetic
operations
TAS
*
4
B
Logic operations AND, OR, XOR, NOT B/W/L 4
Shift SHAL, SHAR, SHLL, SHLR, ROTL, ROTR, ROTXL,
ROTXR
B/W/L 8
Bit manipulation BSET, BCLR, BNOT, BTST, BLD, BILD, BST, BIST,
BAND, BIAND, BOR, BIOR, BXOR, BIXOR
B 14
Branch B
CC
*
2
, JMP, BSR, JSR, RTS — 5
System control TRAPA, RTE, SLEEP, LDC, STC, ANDC, ORC, XORC,
NOP
— 9
Block data transfer EEPMOV — 1
Total: 65
Notes: B: Byte size; W: Word size; L: Longword size.
1. POP.W Rn and PUSH.W Rn are identical to MOV.W @SP+, Rn and MOV.W Rn,
@-SP. POP.L ERn and PUSH.L ERn are identical to MOV.L @SP+, ERn and MOV.L
ERn, @-SP.
2. B
CC
is the general name for conditional branch instructions.
3. Cannot be used in this LSI.
4. Only register ER0, ER1, ER4, or ER5 should be used when using the TAS instruction.