Datasheet

Section 10 I/O Ports
Rev.7.00 Mar. 18, 2009 page 497 of 1136
REJ09B0109-0700
• P63/TMCI1/TEND1/IRQ11
The pin function is switched as shown below according to the combination of bit TEE1 in
DMATCR of the DMAC, bit P63DDR, and bit ITS11 in ITSR.
TEE1 0 1
P63DDR 0 1 ⎯
P63
input
P63
output
TEND1
output
Pin function
IRQ11 interrupt input
*
1
TMCI1 input
*
2
Notes: 1. IRQ11 interrupt input when ITS11 = 0.
2. When used as the external clock input pin for the TMR, its pin function should be
specified to the external clock input by the CKS2 to CKS0 bits in TCR_1.
• P62/TMCI0/TEND0/IRQ10
The pin function is switched as shown below according to the combination of bit TEE0 in
DMATCR of the DMAC, bit P62DDR, and bit ITS10 in ITSR.
TEE0 0 1
P62DDR 0 1 ⎯
P62
input
P62
output
TEND0
output
Pin function
IRQ10 interrupt input
*
1
TMCI0 input
*
2
Notes: 1. IRQ10 interrupt input when ITS10 = 0.
2. When used as the external clock input pin for the TMR, its pin function should be
specified to the external clock input by the CKS2 to CKS0 bits in TCR_0.