Manualshelf

Datasheet

ManualsBrandsRENESAS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller LQFP 144 (20x20) 16-Bit 34 MHz I/O number 96
581582583584585586587588589590
Section 10 I/O Ports
Rev.7.00 Mar. 18, 2009 page 520 of 1136
REJ09B0109-0700
10.11.6 Port C Input Pull-Up MOS States
Port C has a built-in input pull-up MOS function that can be controlled by software. This input
pull-up MOS function can be used in modes 4 and 7. Input pull-up MOS can be specified as on or
off on a bit-by-bit basis.
In modes 4 and 7, when a PCDDR bit is cleared to 0, setting the corresponding PCPCR bit to 1
turns on the input pull-up MOS for that pin.
Table 10.4 summarizes the input pull-up MOS states.
Table 10.4 Input Pull-Up MOS States (Port C)
Mode
Reset
Hardware
Standby Mode
Software
Standby Mode
In Other
Operations
1, 2 Off Off Off Off
4, 7 On/Off On/Off
Legend:
Off: Input pull-up MOS is always off.
On/Off: On when PCDDR = 0 and PCPCR = 1; otherwise off.