Datasheet

Section 10 I/O Ports
Rev.7.00 Mar. 18, 2009 page 471 of 1136
REJ09B0109-0700
• P10/PO8/TIOCA0
The pin function is switched as shown below according to the combination of the TPU channel
0 settings (by bits MD3 to MD0 in TMDR_0, bits IOA3 to IOA0 in TIORH_0, and bits
CCLR2 to CCLR0 in TCR_0), bit NDER8 in NDERH, and bit P10DDR.
TPU channel 0
settings
(1) in table
below
(2) in table below
P10DDR ⎯ 0 1 1
NDER8 ⎯ ⎯ 0 1
Pin function TIOCA0 output P10 input P10 output PO8 output
TIOCA0 input
*
1
TPU channel 0
settings
(2) (1) (2) (1) (1) (2)
MD3 to MD0 B'0000 B'001× B'0010 B'0011
IOA3 to IOA0 B'0000
B'0100
B'1×××
B'0001 to
B'0011
B'0101 to
B'0111
B'××00 Other
than B'××00
Other than B'××00
CCLR2, CCLR0 ⎯ ⎯ ⎯ ⎯ Other
than
B'001
B'001
Output function ⎯ Output
compare
output
⎯ PWM
*
2
mode 1
output
PWM
mode 2
output
⎯
Legend:
×: Don’t care
Notes: 1. TIOCA0 input when MD3 to MD0 = B'0000 and IOA3 to IOA0 = B'10××.
2. TIOCB0 output disabled.