Datasheet

Section 13 8-Bit Timers (TMR)
Rev.7.00 Mar. 18, 2009 page 667 of 1136
REJ09B0109-0700
13.5.5 Timing of TCNT External Reset
TCNT is cleared at the rising edge of an external reset input, depending on the settings of the
CCLR1 and CCLR0 bits in TCR. The clear pulse width must be at least 1.5 states. Figure 13.8
shows the timing of this operation.
Clear signal
External reset
input pin
φ
TCNT N H'00N – 1
Figure 13.8 Timing of Clearance by External Reset
13.5.6 Timing of Overflow Flag (OVF) Setting
The OVF in TCSR is set to 1 when TCNT overflows (changes from H'FF to H'00). Figure 13.9
shows the timing of this operation.
OVF
Overflow signal
TCNT
φ
H'FF H'00
Figure 13.9 Timing of OVF Setting