Datasheet

Section 22 ROM
R01UH0166EJ0600 Rev. 6.00 Page 983 of 1434
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Table 22.13 shows the pin settings for programmer mode.
Table 22.13 Programmer Mode Pin Settings
Pin Names Settings
Mode pins: MD2, MD1, MD0 Low level input to MD2, MD1, and MD0.
Mode setting pins: PF0, P16, P14 High level input to PF0, low level input to P16 and P14
FWE pin High level input (in auto-program and auto-erase
modes)
RES pin Power-on reset circuit
XTAL, EXTAL, PLLVCC
*
, PLLCAP,
PLLVSS pins
Oscillator circuit
Note: * The H8S/2633R does not have a PLLVCC pin. (The pin in that position is an NC pin.)
22.11.1 Socket Adapter and Memory Map
Memory read (verify), write, and flash memory initialize (erase all) are supported in the writer
mode using a PROM writer. In this case a general purpose PROM writer is used with a custom
socket adapter installed. Table 22.14 lists suitable socket adapter models. The socket adapter used
with the write mode of the LSI must be one of the models listed in table 22.14.
Table 22.14 Socket Adapter Models
Part No. Package Socket Adapter Model Manufacturer
HD64F2633F ME2633ESHF1H Minato Electronics Inc.
HD64F2633RF
128-pin QFP
(FP-128B)
HF2633Q128D4001 Data-IO Japan Inc.
HD64F2633TE ME2643ESNF1H Minato Electronics Inc.
HD64F2633RTE
120-pin TQFP
(TFP-120)
HF2633T120D4001 Data-IO Japan Inc.