Datasheet

Section 2 CPU
Page 70 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Table 2.3 Instructions Classified by Function
Type Instruction Size
*
1
Function
Data transfer MOV B/W/L (EAs) → Rd, Rs → (Ead)
Moves data between two general registers or between a
general register and memory, or moves immediate data
to a general register.
MOVFPE B Cannot be used in the H8S/2633 Group.
MOVTPE B Cannot be used in the H8S/2633 Group.
POP W/L @SP+ → Rn
Pops a register from the stack. POP.W Rn is identical to
MOV.W @SP+, Rn. POP.L ERn is identical to MOV.L
@SP+, ERn.
PUSH W/L Rn → @–SP
Pushes a register onto the stack. PUSH.W Rn is
identical to MOV.W Rn, @–SP. PUSH.L ERn is identical
to MOV.L ERn, @–SP.
LDM
*
2
L @SP+ → Rn (register list)
Pops two or more general registers from the stack.
STM
*
2
L Rn (register list) → @–SP
Pushes two or more general registers onto the stack.
Arithmetic
operations
ADD
SUB
B/W/L Rd ± Rs → Rd, Rd ± #IMM → Rd
Performs addition or subtraction on data in two general
registers, or on immediate data and data in a general
register. (Immediate byte data cannot be subtracted from
byte data in a general register. Use the SUBX or ADD
instruction.)
ADDX
SUBX
B Rd ± Rs ± C → Rd, Rd ± #IMM ± C → Rd
Performs addition or subtraction with carry or borrow on
byte data in two general registers, or on immediate data
and data in a general register.
INC
DEC
B/W/L Rd ± 1 → Rd, Rd ± 2 → Rd
Increments or decrements a general register by 1 or 2.
(Byte operands can be incremented or decremented by
1 only.)
ADDS
SUBS
L Rd ± 1 → Rd, Rd ± 2 → Rd, Rd ± 4 → Rd
Adds or subtracts the value 1, 2, or 4 to or from data in a
32-bit register.