Datasheet

Section 7 Bus Controller
R01UH0166EJ0600 Rev. 6.00 Page 181 of 1434
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Bit 3 Bit 2
W11 W10 Description
0 0 Program wait not inserted when external space area 1 is accessed
1 1 program wait state inserted when external space area 1 is accessed
1 0 2 program wait states inserted when external space area 1 is accessed
1 3 program wait states inserted when external space area 1 is accessed
(Initial value)
Bits 1 and 0—Area 0 Wait Control 1 and 0 (W01, W00): These bits select the number of
program wait states when area 0 in external space is accessed while the AST0 bit in ASTCR is set
to 1.
Bit 1 Bit 0
W01 W00 Description
0 0 Program wait not inserted when external space area 0 is accessed
1 1 program wait state inserted when external space area 0 is accessed
1 0 2 program wait states inserted when external space area 0 is accessed
1 3 program wait states inserted when external space area 0 is accessed
(Initial value)
7.2.4 Bus Control Register H (BCRH)
7
ICIS1
1
R/W
6
ICIS0
1
R/W
5
BRSTRM
0
R/W
4
BRSTS1
1
R/W
3
BRSTS0
0
R/W
0
RMTS0
*
0
R/W
2
RMTS2
*
0
R/W
1
RMTS1
*
0
R/W
Bit
Initial value
R/W
:
:
:
BCRH is an 8-bit readable/writable register that selects enabling or disabling of idle cycle
insertion, and the memory interface for area 0.
BCRH is initialized to H'D0 by a power-on reset and in hardware standby mode. It is not
initialized by a manual reset or in software standby mode.
Note: * DRAM interface is not available in the H8S/2695.
Only a 0 may be written to RMTS2, RMTS1, or RMTS0.