Datasheet

Section 8 DMA Controller (DMAC)
(This function is not available in the H8S/2695)
R01UH0166EJ0600 Rev. 6.00 Page 251 of 1434
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
8.1.4 Pin Configuration
Table 8.2 summarizes the DMAC pins.
In short address mode, external request transfer, single address transfer, and transfer end output
are not performed for channel A.
The DMA transfer acknowledge function is used in channel B single address mode in short
address mode.
When the DREQ pin is used, do not designate the corresponding port for output.
With regard to the DACK pins, setting single address transfer automatically sets the corresponding
port to output, functioning as a DACK pin.
With regard to the TEND pins, whether or not the corresponding port is used as a TEND pin can
be specified by means of a register setting.
Table 8.2 DMAC Pins
Channel Pin Name Symbol I/O Function
0 DMA request 0 DREQ0 Input DMAC channel 0 external
request
DMA transfer acknowledge 0 DACK0 Output DMAC channel 0 single address
transfer acknowledge
DMA transfer end 0 TEND0 Output DMAC channel 0 transfer end
1 DMA request 1 DREQ1 Input DMAC channel 1 external
request
DMA transfer acknowledge 1 DACK1 Output DMAC channel 1 single address
transfer acknowledge
DMA transfer end 1 TEND1 Output DMAC channel 1 transfer end