Datasheet

Section 8 DMA Controller (DMAC)
(This function is not available in the H8S/2695)
Page 256 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
8.2.3 Execute Transfer Count Register (ETCR)
ETCR is a 16-bit readable/writable register that specifies the number of transfers. The setting of
this register is different for sequential mode and idle mode on the one hand, and for repeat mode
on the other.
(1) Sequential Mode and Idle Mode
Transfer Counter
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETCR :
Initial value : * * * * * * * * * * * * * * * *
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
*: Undefined
In sequential mode and idle mode, ETCR functions as a 16-bit transfer counter (with a count range
of 1 to 65536). ETCR is decremented by 1 each time a transfer is performed, and when the count
reaches H'0000, the DTE bit in DMABCR is cleared, and transfer ends.