Datasheet

Section 8 DMA Controller (DMAC)
(This function is not available in the H8S/2695)
Page 258 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
8.2.4 DMA Control Register (DMACR)
Bit : 7 6 5 4 3 2 1 0
DMACR : DTSZ DTID RPE DTDIR DTF3 DTF2 DTF1 DTF0
Initial value : 0 0 0 0 0 0 0 0
R/W : R/W R/W R/W R/W R/W R/W R/W R/W
DMACR is an 8-bit readable/writable register that controls the operation of each DMAC channel.
DMACR is initialized to H'00 by a reset, and in standby mode.
Bit 7—Data Transfer Size (DTSZ): Selects the size of data to be transferred at one time.
Bit 7
DTSZ Description
0 Byte-size transfer (Initial value)
1 Word-size transfer
Bit 6—Data Transfer Increment/Decrement (DTID): Selects incrementing or decrementing of
MAR every data transfer in sequential mode or repeat mode.
In idle mode, MAR is neither incremented nor decremented.
Bit 6
DTID Description
0 MAR is incremented after a data transfer (Initial value)
• When DTSZ = 0, MAR is incremented by 1 after a transfer
• When DTSZ = 1, MAR is incremented by 2 after a transfer
1 MAR is decremented after a data transfer
• When DTSZ = 0, MAR is decremented by 1 after a transfer
• When DTSZ = 1, MAR is decremented by 2 after a transfer