Datasheet

Section 8 DMA Controller (DMAC)
(This function is not available in the H8S/2695)
Page 264 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Bit 11—Data Transfer Acknowledge 1B (DTA1B): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 1B data transfer
factor setting.
Bit 11
DTA1B Description
0 Clearing of selected internal interrupt source at time of DMA transfer is disabled
(Initial value)
1 Clearing of selected internal interrupt source at time of DMA transfer is enabled
Bit 10—Data Transfer Acknowledge 1A (DTA1A): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 1A data transfer
factor setting.
Bit 10
DTA1A Description
0 Clearing of selected internal interrupt source at time of DMA transfer is disabled
(Initial value)
1 Clearing of selected internal interrupt source at time of DMA transfer is enabled
Bit 9—Data Transfer Acknowledge 0B (DTA0B): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 0B data transfer
factor setting.
Bit 9
DTA0B Description
0 Clearing of selected internal interrupt source at time of DMA transfer is disabled
(Initial value)
1 Clearing of selected internal interrupt source at time of DMA transfer is enabled