Datasheet

Section 8 DMA Controller (DMAC)
(This function is not available in the H8S/2695)
Page 306 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
ETCRAL is decremented by 1 each time a byte or word transfer is performed. In response to a
single transfer request, burst transfer is performed until the value in ETCRAL reaches H'00.
ETCRAL is then loaded with the value in ETCRAH. At this time, the value in the MAR register
for which a block designation has been given by the BLKDIR bit in DMACRA is restored in
accordance with the DTSZ, SAID/DAID, and SAIDE/DAIDE bits in DMACR.
ETCRB is decremented by 1 every block transfer, and when the count reaches H'0000 the DTE bit
is cleared and transfer ends. If the DTIE bit is set to 1 at this point, an interrupt request is sent to
the CPU or DTC.
Figure 8.15 shows the operation flow in block transfer mode.