Datasheet

Section 11 16-Bit Timer Pulse Unit (TPU)
Page 558 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Bit 5
BFB Description
0 TGRB operates normally (Initial value)
1 TGRB and TGRD used together for buffer operation
Bit 4—Buffer Operation A (BFA): Specifies whether TGRA is to operate in the normal way, or
TGRA and TGRC are to be used together for buffer operation. When TGRC is used as a buffer
register, TGRC input capture/output compare is not generated.
In channels 1, 2, 4, and 5, which have no TGRC, bit 4 is reserved. It is always read as 0 and
cannot be modified.
Bit 4
BFA Description
0 TGRA operates normally (Initial value)
1 TGRA and TGRC used together for buffer operation
Bits 3 to 0—Modes 3 to 0 (MD3 to MD0): These bits are used to set the timer operating mode.
Bit 3 Bit 2 Bit 1 Bit 0
MD3
*
1
MD2
*
2
MD1 MD0 Description
0 0 0 0 Normal operation (Initial value)
1 Reserved
1 0 PWM mode 1
1 PWM mode 2
1 0 0 Phase counting mode 1
1 Phase counting mode 2
1 0 Phase counting mode 3
1 Phase counting mode 4
1 * * * —
*: Don't care
Notes: 1. MD3 is a reserved bit. In a write, it should always be written with 0.
2. Phase counting mode cannot be set for channels 0 and 3. In this case, 0 should always
be written to MD2.