Datasheet

Section 11 16-Bit Timer Pulse Unit (TPU)

R01UH0166EJ0600 Rev. 6.00 Page 577 of 1434

Mar 02, 2011

H8S/2633 Group, H8S/2633 F-ZTAT

H8S/2633R F-ZTAT

, H8S/2695

Bit 3—Input Capture/Output Compare Flag D (TGFD): Status flag that indicates the

occurrence of TGRD input capture or compare match in channels 0 and 3.

In channels 1, 2, 4, and 5, bit 3 is reserved. It is always read as 0 and cannot be modified.

Bit 3

TGFD Description

0 [Clearing conditions] (Initial value)

• When DTC

is activated by TGID interrupt while DISEL bit of MRB in DTC

is 0

• When 0 is written to TGFD after reading TGFD = 1

1 [Setting conditions]

• When TCNT = TGRD while TGRD is functioning as output compare register

• When TCNT value is transferred to TGRD by input capture signal while TGRD is

functioning as input capture register

Note: * This function is not available in the H8S/2695.

Bit 2—Input Capture/Output Compare Flag C (TGFC): Status flag that indicates the

occurrence of TGRC input capture or compare match in channels 0 and 3.

In channels 1, 2, 4, and 5, bit 2 is reserved. It is always read as 0 and cannot be modified.

Bit 2

TGFC Description

0 [Clearing conditions] (Initial value)

• When DTC

is activated by TGIC interrupt while DISEL bit of MRB in DTC

is 0

• When 0 is written to TGFC after reading TGFC = 1

1 [Setting conditions]

• When TCNT = TGRC while TGRC is functioning as output compare register

• When TCNT value is transferred to TGRC by input capture signal while TGRC is

functioning as input capture register

Note: * This function is not available in the H8S/2695.