Datasheet

Section 11 16-Bit Timer Pulse Unit (TPU)
Page 594 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
Example of Synchronous Operation Setting Procedure: Figure 11.14 shows an example of the
synchronous operation setting procedure.
Set synchronous
operation
Synchronous operation
selection
Set TCNT
Synchronous presetting
<Synchronous presetting>
[1]
[2]
Synchronous clearing
Select counter
clearing source
<Counter clearing>
[3]
Start count [5]
Set synchronous
counter clearing
<Synchronous clearing>
[4]
Start count [5]
Clearing
source generation
channel?
No
Yes
[1]
[2]
[3]
[4]
[5]
Set to 1 the SYNC bits in TSYR corresponding to the channels to be designated for synchronous
operation.
When the TCNT counter of any of the channels designated for synchronous operation is
written to, the same value is simultaneously written to the other TCNT counters.
Use bits CCLR2 to CCLR0 in TCR to specify TCNT clearing by input capture/output compare,
etc.
Use bits CCLR2 to CCLR0 in TCR to designate synchronous clearing for the counter clearing
source.
Set to 1 the CST bits in TSTR for the relevant channels, to start the count operation.
Figure 11.14 Example of Synchronous Operation Setting Procedure