Datasheet

Section 12 Programmable Pulse Generator (PPG)
(This function is not available in the H8S/2695)
Page 642 of 1434 R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
NDERL Bits 7 to 0—Next Data Enable 7 to 0 (NDER7 to NDER0): These bits enable or
disable pulse output on a bit-by-bit basis. However, the H8S/2633 Group has no output pins
corresponding to NDRL.
Bits 7 to 0
NDER7 to NDER0 Description
0 Pulse outputs PO7 to PO0 are disabled (NDR7 to NDR0 are not
transferred to POD7 to POD0) (Initial value)
1 Pulse outputs PO7 to PO0 are enabled (NDR7 to NDR0 are transferred to
POD7 to POD0)
12.2.2 Output Data Registers H and L (PODRH, PODRL)
PODRH
Bit : 7 6 5 4 3 2 1 0
POD15 POD14 POD13 POD12 POD11 POD10 POD9 POD8
Initial value : 0 0 0 0 0 0 0 0
R/W : R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
PODRL
Bit : 7 6 5 4 3 2 1 0
POD7 POD6 POD5 POD4 POD3 POD2 POD1 POD0
Initial value : 0 0 0 0 0 0 0 0
R/W : R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
R/(W)
*
Note: * A bit that has been set for pulse output by NDER is read-only.
PODRH and PODRL are 8-bit readable/writable registers that store output data for use in pulse
output. However, the H8S/2633 Group has no pins corresponding to PODRL.