Datasheet

Page viii of lvi R01UH0166EJ0600 Rev. 6.00
Mar 02, 2011
H8S/2633 Group H8S/2633R Group
H8S/2633F-ZTAT H8S/2633 H8S/2632 H8S/2631 H8S/2633RF-ZTAT H8S/2695
Operating
voltage
range
25-MHz operation version
PV
CC
= 4.5 V to 5.5 V, V
CC
= PLLV
CC
= 3.0 V to 3.6 V, AV
CC
= 4.5 V to 5.5 V,
Vref
= 4.5 V to AV
CC
16-MHz operation version (low-voltage version)
PV
CC
= 3.0 V to 5.5 V, V
CC
= PLLV
CC
= 3.0 V to 3.6 V
[When using A/D or D/A]
AV
CC
= 3.6 V to 5.5 V, Vref = 3.6 V to AV
CC
[When not using A/D or D/A]
AV
CC
= 3.3 V to 5.5 V, Vref = 3.3 V to AV
CC
PV
CC
= 4.5 V to 5.5 V
(Single power supply version lacking V
CC
and PLLV
CC
pins)
AV
CC
= 4.5 V to 5.5 V
Vref = 4.5 V to AV
CC
Power
supply
pins
2 power supply configurations, PV
CC
(5 V power supply) and
V
CC
(3 V power supply), PLLV
CC
is 3 V power supply
• PV
CC
(5 V power supply) single power
supply configuration
• Do not connect the VCL pin to the
power supply. Instead, connect it to a
ground via a 0.1 µF power supply
stabilizer capacitor (which should be
mounted close to the pin).
• Do not connect the V
CC
power supply to
the VCL pin.
• Note that the VCL pin is located in the
same position as the V
CC
pin on the
older H8S/2633 Group and
H8S/2633F.
External
capacitor
0.1 µF
VCL (pin 11: FP128B)
(pin 7: TFP120)
V
SS
(pin 9: FP128B)
(pin 5: TFP120)
• There is no PLLV
CC
power supply pin.
EXTAL
input level
V
IH
: V
CC
× 0.8 V to V
CC
+ 0.3 V
V
IL
: –0.3 V to V
CC
× 0.2 V
(V
CC
= 3.0 V to 3.6 V)
V
IH
: PV
CC
× 0.8 V to PV
CC
+ 0.3 V
V
IL
: –0.3 V to PV
CC
× 0.2 V
(PV
CC
= 4.5 V to 5.5 V)
Interrupt
sources
External interrupts: NMLIRQ7 to IRQ0
Internal interrupts: 72 sources
External interrupts:
NMLIRQ7 to IRQ0
Internal interrupts:
49 sources
32 kHz
oscillator
Yes (subactive mode, subsleep mode, and watch mode supported) No (subactive
mode, subsleep
mode, and watch
mode not
supported)