Datasheet

Section 19 A/D Converter
R01UH0166EJ0600 Rev. 6.00 Page 913 of 1434
Mar 02, 2011
H8S/2633 Group, H8S/2633 F-ZTAT
TM
,
H8S/2633R F-ZTAT
TM
, H8S/2695
19.3 Interface to Bus Master
ADDRA to ADDRD are 16-bit registers, and the data bus to the bus master is 8 bits wide.
Therefore, in accesses by the bus master, the upper byte is accessed directly, but the lower byte is
accessed via a temporary register (TEMP).
A data read from ADDR is performed as follows. When the upper byte is read, the upper byte
value is transferred to the CPU and the lower byte value is transferred to TEMP. Next, when the
lower byte is read, the TEMP contents are transferred to the CPU.
When reading ADDR. always read the upper byte before the lower byte. It is possible to read only
the upper byte, but if only the lower byte is read, incorrect data may be obtained.
Figure 19.2 shows the data flow for ADDR access.
Bus master
(H'AA)
ADDRnH
(H'AA)
ADDRnL
(H'40)
Lower byte read
ADDRnH
(H'AA)
ADDRnL
(H'40)
TEMP
(H'40)
TEMP
(H'40)
(n = A to D)
(n = A to D)
Module data bus
Module data bus
Bus interface
Upper byte read
Bus master
(H'40)
Bus interface
Figure 19.2 ADDR Access Operation (Reading H'AA40)