Datasheet

Section 6 Power-Down Modes
Rev. 3.00 Mar. 15, 2006 Page 82 of 526
REJ09B0060-0300
Table 6.2 Transition Mode after SLEEP Instruction Execution and Transition Mode due
to Interrupt
DTON SSBY SMSEL LSON
Transition Mode after
SLEEP Instruction
Execution
Transition Mode due to
Interrupt
0 0 0 0 Sleep mode Active mode
1 Subactive mode
1 0 Subsleep mode Active mode
1 Subactive mode
1 X X Standby mode Active mode
1 X 0* 0 Active mode (direct
transition)
—
X X 1 Subactive mode (direct
transition)
—
[Legend] X: Don't care.
* When a state transition is performed while SMSEL is 1, timer V, SCI3, SCI3_2, SCI3_3,
and the A/D converter are reset, and all registers are set to their initial values. To use
these functions after entering active mode, reset the registers.