Datasheet

Section 14 Timer Z

Rev. 3.00 Mar. 15, 2006 Page 260 of 526

REJ09B0060-0300

1. Canceling Procedure of Complementary PWM Mode: Figure 14.30 shows the complementary

PWM mode canceling procedure.

[1] Clear bit CMD1 in TFCR to 0, and set channels 0

and 1 to normal operation.

[2] After setting channels 0 and 1 to normal

operation, clear bits STR0 and STR1 in TSTR to

0 and stop TCNT0 and TCNT1.

[1]

[2]

Complementary PWM mode

Stop counter operation

Cancel complementary

PWM mode

Figure 14.30 Canceling Procedure of Complementary PWM Mode