Datasheet

Section 18 I
2
C Bus Interface 2 (IIC2)
Rev. 3.00 Mar. 15, 2006 Page 350 of 526
REJ09B0060-0300
18.3.4 I
2
C Bus Interrupt Enable Register (ICIER)
ICIER enables or disables interrupt sources and acknowledge bits, sets acknowledge bits to be
transferred, and confirms acknowledge bits to be received.
Bit Bit Name
Initial
Value R/W Description
7 TIE 0 R/W Transmit Interrupt Enable
When the TDRE bit in ICSR is set to 1, this bit enables
or disables the transmit data empty interrupt (TXI).
0: Transmit data empty interrupt request (TXI) is
disabled.
1: Transmit data empty interrupt request (TXI) is
enabled.
6 TEIE 0 R/W Transmit End Interrupt Enable
This bit enables or disables the transmit end interrupt
(TEI) at the rising of the ninth clock while the TDRE bit
in ICSR is 1. TEI can be canceled by clearing the TEND
bit or the TEIE bit to 0.
0: Transmit end interrupt request (TEI) is disabled.
1: Transmit end interrupt request (TEI) is enabled.
5 RIE 0 R/W Receive Interrupt Enable
This bit enables or disables the receive data full
interrupt request (RXI) and the overrun error interrupt
request (ERI) with the clocked synchronous format,
when a receive data is transferred from ICDRS to
ICDRR and the RDRF bit in ICSR is set to 1. RXI can
be canceled by clearing the RDRF or RIE bit to 0.
0: Receive data full interrupt request (RXI) and overrun
error interrupt request (ERI) with the clocked
synchronous format are disabled.
1: Receive data full interrupt request (RXI) and overrun
error interrupt request (ERI) with the clocked
synchronous format are enabled.