Datasheet

Section 12 Timer Z
Rev. 4.00 Mar. 15, 2006 Page 213 of 556
REJ09B0026-0400
Canceling Procedure of Complementary PWM Mode: Figure 12.30 shows the complementary
PWM mode canceling procedure.
[1] Clear bit CMD1 in TFCR to 0, and set
channels 0 and 1 to normal operation.
[2] After setting channels 0 and 1 to normal
operation, clear bits STR0 and STR1 in
TSTR to 0 and stop TCNT0 and TCNT1.
[1]
[2]
Complementary PWM mode
Stop counter operation
Cancel complementary
PWM mode
<Normal operation>
Figure 12.30 Canceling Procedure of Complementary PWM Mode