Datasheet

Section 2 CPU
Rev. 4.00 Mar. 15, 2006 Page 45 of 556
REJ09B0026-0400
• BSET instruction executed
BSET #0, @RAM0
The BSET instruction is executed designating the PDR5
work area (RAM0).
• After executing BSET instruction
MOV.B @RAM0, R0L
MOV.B R0L, @PDR5
The work area (RAM0) value is written to PDR5.
P57 P56 P55 P54 P53 P52 P51 P50
Input/output Input Input Output Output Output Output Output Output
Pin state Low
level
High
level
Low
level
Low
level
Low
level
Low
level
Low
level
High
level
PCR5 0 0 1 1 1 1 1 1
PDR5 1 0 0 0 0 0 0 1
RAM0 1 0 0 0 0 0 0 1
(2) Bit Manipulation in a Register Containing a Write-Only Bit
Example 3: BCLR instruction executed designating port 5 control register PCR5
P57 and P56 are input pins, with a low-level signal input at P57 and a high-level signal input at
P56. P55 to P50 are output pins that output low-level signals. An example of setting the P50 pin as
an input pin by the BCLR instruction is shown below. It is assumed that a high-level signal will be
input to this input pin.
• Prior to executing BCLR instruction
P57 P56 P55 P54 P53 P52 P51 P50
Input/output Input Input Output Output Output Output Output Output
Pin state Low
level
High
level
Low
level
Low
level
Low
level
Low
level
Low
level
Low
level
PCR5 0 0 1 1 1 1 1 1
PDR5 1 0 0 0 0 0 0 0