Datasheet

Section 6 Power-Down Modes
LPW3002A_000120030300 Rev. 3.00 Sep. 10, 2007 Page 93 of 528
REJ09B0216-0300
Section 6 Power-Down Modes
This LSI has six modes of operation after a reset. These include a normal active mode and four
power-down modes, in which power consumption is significantly reduced. Module standby mode
reduces power consumption by selectively halting on-chip module functions.
• Active mode
The CPU and all on-chip peripheral modules are operable on the system clock. The system
clock frequency can be selected from φosc, φosc/8, φosc/16, φosc/32, and φosc/64.
• Subactive mode
The CPU and all on-chip peripheral modules are operable on the subclock. The subclock
frequency can be selected from φw/2, φw/4, and φw/8.
• Sleep mode
The CPU halts. On-chip peripheral modules are operable on the system clock.
• Subsleep mode
The CPU halts. On-chip peripheral modules are operable on the subclock.
• Standby mode
The CPU and all on-chip peripheral modules halt. When the clock time-base function is
selected, the RTC is operable.
• Module standby mode
Independent of the above modes, power consumption can be reduced by halting on-chip
peripheral modules that are not used in module units.