Datasheet

Section 6 Power-Down Modes
Rev. 3.00 Sep. 10, 2007 Page 99 of 528
REJ09B0216-0300
6.1.4 Module Standby Control Register 2 (MSTCR2)
MSTCR2 allows the on-chip peripheral modules to enter a standby state in module units.
Bit Bit Name
Initial
Value
R/W Description
7 MSTS3_2 0 R/W SCI3_2 Module Standby
SCI3_2 enters standby mode when this bit is set to1
6, 5  All 0  Reserved
These bits are always read as 0.
4 MSTTB1 0 R/W Timer B1 Module Standby
Timer B1 enters standby mode when this bit is set to1
3, 2  All 0  Reserved
These bits are always read as 0.
1 MSTTZ 0 R/W Timer Z Module Standby
Timer Z enters standby mode when this bit is set to1
0 MSTPWM 0 R/W PWM Module Standby
PWM enters standby mode when this bit is set to1