Datasheet

Section 16 Serial Communication Interface 3 (SCI3)
Rev. 3.00 Sep. 10, 2007 Page 295 of 528
REJ09B0216-0300
Bit Bit Name
Initial
Value
R/W Description
3 PER 0 R/W Parity Error
[Setting condition]
• When a parity error is detected during reception
[Clearing condition]
• When 0 is written to PER after reading PER = 1
2 TEND 1 R Transmit End
[Setting conditions]
• When the TE bit in SCR3 is 0
• When TDRE = 1 at transmission of the last bit of a 1-
frame serial transmit character
[Clearing conditions]
• When 0 is written to TDRE after reading TDRE = 1
• When the transmit data is written to TDR
1 MPBR 0 R Multiprocessor Bit Receive
MPBR stores the multiprocessor bit in the receive
character data. When the RE bit in SCR3 is cleared to 0,
its state is retained.
0 MPBT 0 R/W Multiprocessor Bit Transfer
MPBT stores the multiprocessor bit to be added to the
transmit character data.