Datasheet

Section 13 Timer Z
Rev. 3.00 Sep. 10, 2007 Page 219 of 528
REJ09B0216-0300
Bit Bit Name
Initial
value
R/W Description
2 IMFC 0 R/W Input Capture/Compare Match Flag C
[Setting conditions]
• When TCNT = GRC and GRC is functioning as output
compare register
• When TCNT value is transferred to GRC by input
capture signal and GRC is functioning as input
capture register
[Clearing condition]
• When 0 is written to IMFC after reading IMFC = 1
1 IMFB 0 R/W Input Capture/Compare Match Flag B
[Setting conditions]
• When TCNT = GRB and GRB is functioning as output
compare register
• When TCNT value is transferred to GRB by input
capture signal and GRB is functioning as input
capture register
[Clearing condition]
• When 0 is written to IMFB after reading IMFB = 1
0 IMFA 0 R/W Input Capture/Compare Match Flag A
[Setting conditions]
• When TCNT = GRA and GRA is functioning as output
compare register
• When TCNT value is transferred to GRA by input
capture signal and GRA is functioning as input
capture register
[Clearing condition]
• When 0 is written to IMFA after reading IMFA = 1
Note: Bit 5 is not the UDF flag in TSR_0. It is a reserved bit. It is always read as 1.