Datasheet

Section 6 Power-Down Modes
Rev. 1.50 Sep. 18, 2007 Page 95 of 584
REJ09B0240-0150
Bit Bit Name
Initial
Value R/W Description
1 MSTTV 0 R/W Timer V Module Standby
Timer V enters the standby mode when this bit is set to
1
0 MSTTA 0 R/W RTC Module Standby
RTC enters the standby mode when this bit is set to 1
6.1.5 Module Standby Control Register 2 (MSTCR2)
MSTCR2 allows the on-chip peripheral modules to enter a standby state in module units.
Bit Bit Name
Initial
Value R/W Description
7 MSTS3_2 0 R/W SCI3_2 Module Standby
SCI3_2 enters the standby mode when this bit is set to
1
6
5


0
0


Reserved
These bits are always read as 0.
4 MSTTB1 0 R/W Timer B1 Module Standby
Timer B1 enters the standby mode when this bit is set
to 1
3 to 1  All 0  Reserved
These bits are always read as 0.
0 MSTPWM 0 R/W PWM Module Standby
PWM enters the standby mode when this bit is set to 1