Datasheet

Section 6 Power-Down Modes
Rev. 1.50 Sep. 18, 2007 Page 96 of 584
REJ09B0240-0150
6.1.6 Module Standby Control Register 4 (MSTCR4)
MSTCR4 allows the on-chip peripheral modules to enter a standby state in module units.
Bit Bit Name
Initial
Value R/W Description
7 MSTTRC 0 R/W Timer RC Module Standby
Timer RC enters the standby mode when this bit is set
to 1
6 MSTAD 0 R/W A/D Converter Module Standby
A/D converter enters the standby mode when this bit is
set to 1
5 MSTTRD0 0 R/W Timer RD_0 Module Standby
Timer RD_0 enters the standby mode when this bit is
set to 1
4 MSTTRD1 0 R/W Timer RD_1 Module Standby
Timer RD_1 enters the standby mode when this bit is
set to 1
3 to 0  All 0  Reserved
These bits are always read as 0.