Datasheet

Section 6 Power-Down Modes
Rev. 3.00 Sep. 14, 2006 Page 95 of 408
REJ09B0105-0300
6.5 Module Standby Function
The module standby function can be set to any peripheral module. In module standby mode, the
clock supply to the specified module stops and the module enters the power-down mode. Module
standby mode enables each on-chip peripheral module to enter the standby state by setting a bit
that corresponds to each module in MSTCR1 and MSTCR2 to 1 and cancels the mode by clearing
the bit to 0.