Datasheet

Rev. 3.00 Sep. 14, 2006 Page 399 of 408
REJ09B0105-0300
Main Revisions and Additions in this Edition
Item Page Revision (See Manual for Details)
Preface 
When using an on-chip emulator (E7, E8) for H8/36912,
H8/36902 program development and debugging, the following
restrictions must be noted.
1. The NMI pin is reserved for the E7 or E8, and cannot be
used.
2. Area H'2000 to H'2FFF is used by the E7 or E8, and is not
available to the user.
3. Area H'F980 to H'FD7F must on no account be accessed.
4. When the E7 or E8 is used, address breaks can be set as
either available to the user or for use by the E7 or E8. If
address breaks are set as being used by the E7 or E8, the
address break control registers must not be accessed.
5. When the E7 or E8 is used, NMI is an input/output pin (open-
drain in output mode).
• On-chip memory
Product Classification Remarks
H8/36912 Under planning
H8/36911 Under planning
H8/36902 Under planning
H8/36901 Under planning
Masked ROM
version
H8/36900 Under planning
1
2
On-chip oscillator
Frequency accuracy: 8MHz ±1% (Typ.) Vcc = 5.0 V, Ta = 25˚C
(Flash memory version): 8MHz ±3% Vcc = 4.0 to 5.0 V, Ta = −20 to 75˚C
10MHz ±4% (Typ.) Vcc = 4.0 to 5.0 V, Ta = −20 to 75˚C
Package Code
LQFP-32 FP-32A
SOP-32 FP-32D
SDIP-32 32P4B
2
• Compact package
Package
LQFP-32
SOP-32
SDIP-32*
1.1 Features
2
Note: * Flash memory version only