Datasheet

Rev. 3.00 Sep. 14, 2006 Page vii of xxviii
Notes:
When using an on-chip emulator (E7, E8) for H8/36912, H8/36902 program development and
debugging, the following restrictions must be noted.
1. The NMI pin is reserved for the E7 or E8, and cannot be used.
2. Area H'2000 to H'2FFF is used by the E7 or E8, and is not available to the user.
3. Area H'F980 to H'FD7F must on no account be accessed.
4. When the E7 or E8 is used, address breaks can be set as either available to the user or for use
by the E7 or E8. If address breaks are set as being used by the E7 or E8, the address break
control registers must not be accessed.
5. When the E7 or E8 is used, NMI is an input/output pin (open-drain in output mode).
Related Manuals: The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
http://www.renesas.com/
H8/36912 Group and H8/36902 Group manuals:
Document Title Document No.
H8/36912 Group, H8/36902 Group Hardware Manual This manual
H8/300H Series Software Manual REJ09B0213
User's manuals for development tools:
Document Title Document No.
H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor
User's Manual
REJ10B0058
H8S, H8/300 Series Simulator/Debugger User's Manual REJ10B0211
H8S, H8/300 Series High-Performance Embedded Workshop 3 Tutorial REJ10B0024
H8S, H8/300 Series High-Performance Embedded Workshop 3 User's Manual REJ10B0026
Application notes:
Document Title Document No.
H8S, H8/300 Series C/C++ Compiler Package Application Note REJ05B0464
Single Power Supply F-ZTAT
TM
On-Board Programming REJ05B0520