Datasheet

Section 10 Realtime Clock (RTC)
Rev. 2.00 Jul. 04, 2007 Page 214 of 692
REJ09B0309-0200
10.3.2 Minute Data Register (RMINDR)
RMINDR counts the BCD-coded minute value on the carry generated once per minute by the
RSECDR counting. The setting range is decimal 00 to 59.
Bit Bit Name
Initial
Value
R/W Description
7 BSY —/(0)* R RTC Busy
This bit is set to 1 when the RTC is updating (operating)
the values of second, minute, hour, and day-of-week data
registers. When this bit is 0, the values of second, minute,
hour, and day-of-week data registers must be adopted.
6
5
4
MN12
MN11
MN10
—/(0)*
—/(0)*
—/(0)*
R/W
R/W
R/W
Counting Ten's Position of Minutes
Counts on 0 to 5 for 60-minute counting.
3
2
1
0
MN03
MN02
MN01
MN00
—/(0)*
—/(0)*
—/(0)*
—/(0)*
R/W
R/W
R/W
R/W
Counting One's Position of Minutes
Counts on 0 to 9 once per minute. When a carry is
generated, 1 is added to the ten's position.
Note: * This is the initial value after a reset by the RST bit in RTCCR1.