Datasheet

Section 3 Exception Handling
Rev. 6.00 Aug 04, 2006 page 105 of 680
REJ09B0145-0600
Bit 3: Timer FH interrupt request flag (IRRTFH)
Bit 3
IRRTFH Description
0 Clearing condition:
When IRRTFH = 1, it is cleared by writing 0
(initial value)
1 Setting condition:
When TCFH and OCRFH match in 8-bit timer mode, or when TCF (TCFL, TCFH)
and OCRF (OCRFL, OCRFH) match in 16-bit timer mode
Bit 2: Timer FL interrupt request flag (IRRTFL)
Bit 2
IRRTFL Description
0 Clearing condition:
When IRRTFL= 1, it is cleared by writing 0
(initial value)
1 Setting condition:
When TCFL and OCRFL match in 8-bit timer mode
Bit 1: Timer C interrupt request flag (IRRTC)
Bit 1
IRRTC Description
0 Clearing condition:
When IRRTC= 1, it is cleared by writing 0
(initial value)
1 Setting condition:
When the timer C counter value overflows (from H'FF to H'00) or underflows
(from H'00 to H'FF)
Bit 0: Asynchronous event counter interrupt request flag (IRREC)
Bit 0
IRREC Description
0 Clearing condition:
When IRREC = 1, it is cleared by writing 0
(initial value)
1 Setting condition:
When ECH overflows in 16-bit counter mode, or ECH or ECL overflows in 8-bit
counter mode