Datasheet

Section 1 Overview
Rev. 6.00 Aug 04, 2006 page 26 of 680
REJ09B0145-0600
Coordinates*
Pad No. Pad Name X (µm) Y (µm)
95 PB
6
/AN
6
-996 2295
96 PB
7
/AN
7
-1102 2295
97 PC
0
/AN
8
-1208 2295
98 PC
1
/AN
9
-1313 2295
99 PC
2
/AN
10
-1419 2295
100 PC
3
/AN
11
-1530 2295
101 AV
SS
-1777 2295
Note: * These values show the coordinates of the centers of pads. The accuracy is ±5 µm. The
home-point position is the chip’s center and the center is located at half the distance
between the upper and lower pads and left and right pads. Pad numbers 11, 12, and 34
are power supply (Vss) pads and must be connected. They should not be left open. Pad
number 15 (TEST) must be connected to the Vss position. The device will not operate
properly if the pads are not connected as indicated.