Datasheet

Section 1 Overview
Rev. 6.00 Aug 04, 2006 page 31 of 680
REJ09B0145-0600
Coordinates*
Pad No. Pad Name X (µm) Y (µm)
95 PB
7
/AN
7
-766 1767
96 PC
0
/AN
8
-872 1767
97 PC
1
/AN
9
-978 1767
98 PC
2
/AN
10
-1084 1767
99 PC
3
/AN
11
-1190 1767
100 AV
SS
-1629 1767
Note: * These values show the coordinates of the centers of pads. The accuracy is ±5 µm. The
home-point position is the chip’s center and the center is located at half the distance
between the upper and lower pads and left and right pads. Pad numbers 11, 33, and
100 are power supply (V
SS
) pads and must be connected. They should not be left open.
Pad number 14 (TEST) must be connected to the Vss position. The device will not
operate properly if the pads are not connected as indicated.