Datasheet

Section 1 Overview
Rev. 6.00 Aug 04, 2006 page 35 of 680
REJ09B0145-0600
Pin No.
Type Symbol
FP-100B
TFP-100B
TFP-100G FP-100A I/O Name and Functions
I/O ports PA
3
to PA
0
39 to 42 42 to 45 I/O Port A: This is a 4-bit I/O port. Input
or output can be designated for each
bit by means of port control register
A (PCRA).
P1
7
to P1
0
8 to 1 11 to 4 I/O Port 1: This is an 8-bit I/O port.
Input or output can be designated for
each bit by means of port control
register 1 (PCR1).
P2
7
to P2
0
23 to 16 26 to 19 I/O Port 2: This is an 8-bit I/O port. Input
or output can be designated for each
bit by means of port control register
2 (PCR2).
When the on-chip emulator is used,
pins P24, P25, P26, and P27 are
reserved for use exclusively by the
emulator and therefore cannot be
accessed by the user. With the F-
ZTAT version, pull up pin P24 to
high level to cancel a reset in the in
the user mode.
P3
7
to P3
0
31 to 24 34 to 27 I/O Port 3: This is an 8-bit I/O port.
Input or output can be designated for
each bit by means of port control
register 3 (PCR3).
P5
7
to P5
0
50 to 43 53 to 46 I/O Port 5: This is an 8-bit I/O port.
Input or output can be designated for
each bit by means of port control
register 5 (PCR5).
P6
7
to P6
0
58 to 51 61 to 54 I/O Port 6: This is an 8-bit I/O port.
Input or output can be designated for
each bit by means of port control
register 6 (PCR6).
P7
7
to P7
0
66 to 59 69 to 62 I/O Port 7: This is an 8-bit I/O port.
Input or output can be designated for
each bit by means of port control
register 7 (PCR7).