Emulation Probe User's Manual

M30850T2-EPB User’s Manual 1. Outline
REJ10J1005-0200 Rev.2.00 April 1, 2007
1. Outline
This chapter describes the package components, the system configuration and the preparation for using this product for the first
time.
1.1 Package Components
The M30850T2-EPB package consists of the following items. When unpacking it, check to see if your M30850T2-EPB
contains all of these items.
Table 1.1 Package components
Item Quantity
M30850T2-EPB emulation probe 1
M30800T-PTC (pre-mounted) converter board for 100-pin LCC 1
IC61-1004-051 100-pin LCC socket made by Yamaichi Electronics Co., Ltd. 1
OSC-3 (32MHz) oscillator circuit board 1
OSC-2 oscillator circuit bare board 1
Hardware tool user registration sheet (English) 1
Hardware tool user registration sheet (Japanese) 1
M30850T2-EPB Supplementary Document (English) 1
M30850T2-EPB Supplementary Document (Japanese) 1
M30850T2-EPB User’s Manual (this manual) 1
M30850T2-EPB User’s Manual (Japanese) 1
* Please keep the M30850T2-EPB's packing box and cushion material in your place for reuse at a later time when sending
your product for repair or other purposes. Always use these packing box and cushion material when transporting this
product.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
1.2 Other Tool Products Required for Development
To bring forward programs development on the M32C/80, 84, 85, 86 and 8A Group MCUs, the products listed below are
necessary in addition to those contained package above. Get them separately.
Table 1.2 Other tool products required for development
Product Product name Notes
Emulator main unit PC7501 Required
M32C PC7501 Emulator Debugger Required Emulator debugger
M3T-PD308F V.3.20 Release 1
144-pin 0.5mm pitch LQFP
(144P6Q-A)
M3T-FLX-144NSD
100-pin 0.5mm pitch LQFP
(100P6Q-A)
M3T-F160-100NSD
M3T-100LCC-DMS + M3T-DUMMY100S
M3T-100LCC-DMS + M3T-DIRECT100S
Converter board
100-pin 0.65mm pitch QFP
(100P6S-A)
M3T-100LCC-DMS + M3T-FLX-100NRB
Required according to the foot pattern
of the user system
(see "2.9 Connecting the User System"
on page 29)
* To purchase these products, contact your local distributor.
Page 13 of 98