Emulation Probe User's Manual

M30850T2-EPB User’s Manual 2. Setup
REJ10J1005-0200 Rev.2.00 April 1, 2007
2.4 Connecting the PC7501
Figure 2.3 shows how to connect the PC7501 and the emulation probe.
Figure 2.3 Connecting the PC7501 and emulation probe
CAUTION
Cautions for Connecting the PC7501:
z When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally and
insert it directly.
z Connect the PCA7501EPBA board to the M3T-FLX160-EPB.
z Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be damaged.
M3T-FLX160-EPB
M30850T2-EPB
Note: Connect the PCA7501EPBA board side to the M3T-FLX160-EPB.
Page 22 of 98