User`s manual

M30850T2-EPB User’s Manual 2. Setup
R20UT0208EJ0300 Rev.3.00 Page 21 of 100
Sep 16, 2010
2.2 Installing the Emulator Debugger
If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator
rights. Be aware that users without administrator rights cannot complete the installation.
Install the emulator debugger (M32C PC7501 Emulator Debugger or M3T-PD308F) following the procedure described below.
(1) Downloading the emulator debugger (as occasion demands)
Download the emulator debugger from the URL below (free of charge).
http://www.renesas.com/download
(2) Launching the installer
Start the “setup.exe” program.
(3) Entering the user information
In the “user information” dialog box, enter the user information (contractor, section, contact address, and host machine).
The supplied information will be turned into a form of user registration sheet by e-mail.
(4) Selecting components
In the “component selection” dialog box, select the components you want to install. In this dialog box you can change the
directory in which to install.
(5) Completing the installation
A dialog box will be displayed indicating that setup has been completed. It means that the installation you made is
completed.