Instruction manual

Maintenance and Test Procedures
Access Control Design Guide 51
To use Flash2100:
1. If you are going to use Flash2100 at an SMS client PC, shut down the SMS service named SMS
Client Services at the PC. You can do this as follows:
a) Check whether the SMS Service Monitor icon is displayed in the System Tray (normally, in the
bottom-right corner of the screen):
b) If the icon is displayed, double-click the icon, select SMS Client Services, and click Stop.
c) If the icon is not displayed, open Administrative Tools in the Windows Control Panel, double-click
the Services applet, select SMS Client Services, and click Stop.
2. Double-click the supplied Flash2100.exe file (you may prefer to set up a desktop shortcut to this
file). The following is displayed
3. Click the Config. button in the toolbar. The following is displayed.