Information

Preceding overview of the GR-SAKURA family information
A GR-Sakura is one of the Gadget Renesas board series. This is an Arduino compatible board
based on RX63N series 32-bit MCU, which is a successor MCU of RX62N, has on-chip flash
memory and enhanced communication functions, including an ethernet controller and USB 2.0
Host/Function. The on-chip flash memory of RX63N is programmable by USB mass storage mode,
and the on-chip flash memory of RX63N is visible as a drive on your PC.
The compiler for Rx63N on Cloud is a GNU base, and is supported by Renesas(www xxx.xxxx.xxxx
--- TBD) and, also the Applet on the Android smart phone makes it possible to build an application
with a module plug-in your own application. In this way, anyone can build a system without complex
programming.
The GR-SAKURA board has a USB-function connector.
The GR-SAKURA board has the through hall for the pin header compatible with Arduino,
for pin headers for Rx63N, USB-host connector, LAN connector (RJ-45), and XBee.
The board has a foot pattern for shed of the micro-SD.
GR-SAKURA Board GR-SAKURA-FULL Board
The GR-SAKURA-FULL board comes with LAN connector (RJ-45), 5V DC-Jack, and micro-SD
shed, which are soldered on the board. The USB-host connecter is bundled in the box. So you
can solder it when needed.
Summary of the GR-SAKURA board
Microcontroller: RX63N(R5F563NBDDFP)
Operating Voltage: 3.3V
Clock Speed: 96MHz
Digital I/O Pins: 55
Analog Input Pins: 16
Flash Memory: 1MB
RAM: 128KB
USB- Function: (mini-B)
Wakamatsu Tsusho Co.,ltd