User manual

5.3 Debugging Eclipse Generated Code in HEW Environment
Code generated in Eclipse can be debugged in the Renesas HEW IDE on both simulator and
hardware targets. The procedure to debug code in HEW is given below,
Note: This section contains detailed procedure for debugging projects built using GNUSH,
GNURX, SHC and RXC toolchain in HEW environment.
5.3.1 Creating HEW Debug Configuration Project
Step 1
Create a C/C++ project in KPIT Eclipse for the desired target. Select "Debug using HEW" as the
active configuration. KPIT Eclipse provides pre-configured HEW workspaces for few supported
targets (please refer release notes for the list of supported targets). The project generation wizard
page showing „Debug using HEW‟ as the selected configuration is seen below. This is shown for
the supported targets. Please refer to the release notes for list of supported targets.
For other targets of SH the following wizard page is shown.