User manual

7 Limitations
1. Debug configuration for debugging using GDB simulator has been provided in KPIT Eclipse
for SH /RX targets. However, debugging feature for simulator debug has limitations for projects
created using Renesas RXC toolchain in KPIT Eclipse IDE.
2. For imported projects, 'Debug' is set as the active configuration by default. Please set the
required active configuration manually. To change a configuration click on 'Project' -> 'Build
configurations' -> 'set active' -> 'Debug/HardwareDebug/HewDebug/CustomDebug/Release‟.
The KPIT Eclipse RX and SH samples can be debugged on hardware. Please note that the
configuration needs to be changed to 'HardwareDebug' after importing the samples.
3. When the user attempts to change the build phase settings, however does not change any
settings ultimately and clicks "OK" or "Apply" rather than "Cancel", the project re-builds on
selecting "Build". This is native behavior of Eclipse.
4. Currently, loading an IO file in IO View is not supported in KPIT Eclipse.
5. KPIT Eclipse hangs if the user has not selected any register and the user tries to refresh all the
registers.